Important Tips to Connect the Turntable to a Receiver

You are willing to spend a big budget to buy the best turntable because you want to own the best sounds from this device. Did you get it yet? It is not difficult to do it. Even, it is easier than you think. I am sure that you will listen better to sounds from your turntable when it is connected to a receiver. The preamp will adjust the volume, the timbre, and the balance everything. Thus, the sounds of the turntable are also improved significantly.

Actually, connecting the turntable to a receiver is not too complex as you think. You can quite do it if you know some basic steps. The best element to get two components each other is the phono preamp. I will help you understand more this through this article. I will mention the important tips to connect the turntable to a receiver. Please pair them to enjoy the sweet sound from your vinyl record, right!

How to connect the turntable to a receive

What Is The Phono Preamp?

As we know the cartridge on the end of the tone-arm in the turntable will generate a small voltage when the needle glides on the grooves. This voltage must balance and amplify properly before it comes to your receiver. To boost this signal, it is a duty of the phono preamp and it is also called as a phono stage or RIAA preamp.

Where Is The Phono Preamp?

You are easy to see the phono preamp in three most common places in all systems of the record players:

  • It will be placed on the inside of the receiver.
  • Or it can be put in the separate box which plugging in between the record player and a receiver.
  • Also, the phono preamp is directly installed into the turntable.

If you want to check or see the phono preamp location you should find out it in these positions.

Normally, when knowing the location of the phono preamp you will be easy to connect the turntable to a receiver. According to the opinion of many users, this connecting is also the same with the connecting of any audio components.

Important Tips to Connect the Turntable to a Receiver

You will have three different connections between the turntables to the receiver when the phono preamp has three different locations. Here are the brief introductions that it will help you perform in the right way.

The First Case: The Phono Preamp in the Inside of a Receiver

  • With this case, the turntable does not have the built- in phono preamp.
  • Besides, the receiver will have the built-in phono preamp and have an input. You will see a label with the name “PHONO” on the receiver.
  • After that, you will plug the audio signal cable of the record player into the phono input.
  • Beyond that, at the phono input, you will see a label with the name “GND” for ground. You will connect your turntable ground wire to this position. This will help limit all noises which they come from your device during playing.

The Second Case: The Phono Preamp in the Separate Box

  • In this situation, not only the turntable but also the receiver lack of the built-in phono preamp.
  • Of course, to connect two types of equipment together, you will need to have the phono Preamp in the separate box.
  • Next, you will plug the audio cable of the turntable into the input port of the phono preamp.
  • Then, plugging the audio output of the phono preamp into one of the analog audio input of the receiver.

The Third Case: The Phono Preamp in the Turntable

  • With the system, the turntable will have the built-in phono preamp.
  • The receiver does not have the built-in phono preamp.
  • Now, you only plug the audio signal cable of the turntable into one of the analog audio input of the receiver. In fact, this input is often labeled “Aux”, Line in, or Analog In. It is understood as auxiliary

How to connect when the phono preamp in the turntable

In conclusion, the phono preamp is the main key for this connection. Therefore, you must know what it is and where it is to connect easily. In addition, these tips also play the important roles which you can refer to as well as follow while you want to plug any device together. Have the right understanding, this will help you have more knowledge to connecting and protecting your record player. I hope that through this writing you can connect your turntable to the receiver at home without the expert. Moreover, you can enjoy the great sounds from your vinyl record.

Leave a Reply

Your email address will not be published. Required fields are marked *